Loft

Made from 100% recyclable raw materials.

https://vepa.co.uk/wp-content/uploads/2021/02/Loft_008_Prd_MeetSit_10043367_Transparent.png
https://vepa.co.uk/wp-content/uploads/2021/02/Loft_012_Prd_MeetStand_10036628_Transparent.png
https://vepa.co.uk/wp-content/uploads/2021/02/Loft_009_Prd_MeetSit_10036769_Transparent.png

Loft is available with tops in various sizes, designs and colours. The frame is available in a number of epoxy colours. Loft is also available as a team table with a height of 75 cm and as a standing table with a height of 110 cm.

Loft is
completely
circular
in design

Loft is completely circular in design without waste of residual material and manufactured with cast iron corner connections made from our own residual material. The version with wooden legs is made from residual material left over from the production of our plywood table tops.

 

To make sure that the table is easy to assemble and disassemble, little to no additions are required when, for example, electrification needs to be added. Thus keeping the production process of the table as short and efficient as possible. And also: more eco-friendly. Every single component is made from one type of material. Guaranteeing circularity for the long term and making it easy to reuse.

The partition wall with acoustic sound absorbing padding in combination with a surface-mounted socket is optional.

The Loft corner connectors are cast from our own residual material.

A special machine collects all the bits of steel that remain from the production process. These bits are pressed into small packages.

Would you like to know more about this process? Check out our Sustainable Solutions by Vepa – page about the reuse of steel.

https://vepa.co.uk/wp-content/uploads/2021/02/Loft_001_Overv_Insp_Mix.jpg
https://vepa.co.uk/wp-content/uploads/2021/02/Loft_002_Overv_Insp_Mix.jpg

Product information

Specifications
  • construction made from high-end 100% recyclable steel
  • cast iron corner connections made from our own residual material
  • table top: 25 mm thick
  • table top shapes: square, rectangle, triangle
  • frame: clear lacquered beech legs made of residual material / steel legs
  • table legs take up 25.75 cm on both the left and right side of the
    table
  • full (dis-)assembly without special tools
  • adjustable fee
Materials – table tops
  • 25 mm PEFC MFC with LaserTec edge finish
  • 25 mm PEFC HPL with LaserTec edge finish (not available in 140 cm en 160 cm depth)
  • colours in accordance with colour charts “Décors – Core collection” and “Décors – Trend collection”
Materials – frame
  • steel components epoxied: colours in accordance with colour charts “Epoxy and lacquer Core Collection” and “Epoxy and lacquer Trend Collection”
Options
  • various connection options for PC, laptop, tablet and smartphone
  • cable outlet possible in the middle of the table top
  • cable duct underneath the table
  • cabling kit for steel Loft leg
  • partition screen with acoustic sound-absorbing padding. In combination with surface-mounted socket
  • table top: rounded corners
Decors

Décors COREcollection

Décors TRENDcollection

Epoxy and lacquer

Epoxy and lacquer COREcollection – v.a. 01-02-2024

Epoxy and lacquer TRENDcollection – v.a. 01-02-2024

Fabrics

Blazer

Remix Screen

Medley

Remix

Blazer lite

Radio

ISO 9001 – EN

ISO 14001 – EN

PEFC

Loft – GS-certificate

LaserTec edgebanding

Loft – product sheet

Cleaning and Maintenance – Office furniture

Loft is designed, developed and produced locally.

Local production: Vepa distinguishes itself by producing everything in its own, local facilities. Our own wood, sheet steel, tubular steel, powder coating, wood spray, upholstery and final assembly departments form a complete production circle within a single company. By producing close to the sales market we keep distances small and CO2 emissions minimal.

LCA: By using independent LCAs (life cycle analysis) we reveal the environmental impact of a product. In product development we can greatly improve later designs by carrying out an LCA in the initial phase. In addition, an LCA also provides insight into the main factors responsible for the environmental damage. We then use these factors as starting points for redesign or as focal points for improvement. The LCAs are carried out in accordance with ISO 14044.

FSC® and PEFC™: Vepa only uses certified wood. The FSC® and PEFC™ labels stand for responsible and sustainable forest management. Responsible forest management meets three criteria: it takes account of the environment, respects social aspects (such as the rights of local communities and forest workers) and is economically viable. Moreover, wood is the number one bio-based resource by nature.

TPAC (Timber Procurement Assessment Committee): Timber to be supplied or timber processed in products to be supplied must comply with the Dutch Procurement Criteria for Timber according to the Socially Responsible Procurement criteria. FSC® and PEFC™ are both systems that have been approved by the Dutch state secretary.

SRP criteria: Vepa complies with the SRP criteria drawn up by the central government. The national criteria for socially responsible procurement (SRP) for office furniture are available via the SRP criteria tool (https://www.mvicriteria.nl/en/webtool).

Images

Enthusiastic?

Do you have a question or comment about this product? Leave your message below and one of our colleagues will contact you as soon as possible.

Would you like to get in touch?
Call or email us, we’d love to talk to you!

^
a fair furniture company